Creating Toolpaths for a CNC Lathe Coursera Quiz Answers 2022 [💯% Correct Answer]

by
Creating Toolpaths for a CNC Lathe Coursera Quiz Answers 2022

Hello Peers, Today, we’ll give you the Free answers✅✅✅ to all of the week’s assessments and quizzes for the Creating Toolpaths for a CNC Lathe course that Coursera just started. This is a certification course that any student who wants to take it can take.

If you couldn’t find this course for free, you can apply for financial aid to get it for free. Click on the link below to learn more about the Coursera financial aid process and to find answers.

Check out this article – “How to Apply for Financial Ads?”

Table of Contents
Use “Ctrl+F” To Find Any Questions Answer. & For Mobile User, You Just Need To Click On Three dots In Your Browser & You Will Get A “Find” Option There. Use These Option to Get Any Random Questions Answer.

Course Apply Link – Creating Toolpaths for a CNC Lathe

Here, you will find Creating Toolpaths for a CNC Lathe Exam Answers in Bold Color below.

These answers are updated recently and are 100% correct✅ answers of all week, assessment, and final exam answers of Creating Toolpaths for a CNC Lathe from Coursera Free Certification Course.

Creating Toolpaths for a CNC Lathe Quiz Answers

Week 01: Creating Toolpaths for a CNC Lathe Quiz Answers

Quiz 01: Pre-course questions

Q1. How familiar are you with turning operations and practices?

  • I am not familiar with machining operations or practices.
  • I think I have heard of this or a similar concept.
  • I am familiar with manual turning only.
  • I am familiar with manual and CNC turning.

Q2. Are you familiar with the term C-axis?

  • I am not familiar with the term.
  • I am familiar with the term and understand its application on a CNC Lathe.
  • I have heard the term, but I am not certain what it means.
  • I think I have heard of this or a similar concept.

Q3. What best describes your knowledge of current manufacturing technologies? (example: 3D printing, Injection Molding, CNC Machining, Swiss Mills)

  • I have a deep knowledge in some methods of manufacture.
  • I have no knowledge about manufacturing methods.
  • I am familiar with most of today’s methods of manufacture.
  • I can identify types of manufacturing but have no further knowledge in the subject.

Q4. What best describes your current level of knowledge with direct editing models in Fusion 360?

  • I have been using Fusion 360 for some time and have a good understanding of direct modeling tools.
  • I am new to Fusion 360 and CAD in general and don’t know what direct editing is.
  • I have been using Fusion 360 for a little while but have knowledge in other CAD programs with this functionality.
  • I have no prior knowledge using Fusion 360.

Q5. What best describes your level of interest in programming CNC Lathes?

  • Extremely interested.
  • Moderately interested.
  • Some interest but I am really looking forward exploring.
  • Little to no interest in the subject matter.

Creating Toolpaths for a CNC Lathe Week 04 Quiz Answers

Quiz 01: Final test

Q1. Which of the following settings for a Turning Groove toolpath can be modified to cut internal features of a part?

  • Set the Turning Mode to Outside Grooving in the Tool tab
  • Set the Turning Mode to Inside Grooving in the Tool tab
  • Set Grooving to Allow radial and axial grooving in the Passes tab
  • Set Grooving to Don’t allow grooving

Q2. Which option in a Turning Part toolpath can be used to add a fillet or chamfer to the back edge of the part?

  • Transfer Stock
  • Use Pecking
  • Edge Break
  • Make Sharp Corners

Q3. When configuring a Turning Single Groove toolpath, which of the following Groove Side Alignment settings will offset the tool in the negative Z direction from the selected Groove Position?

  • Top
  • Front
  • Middle
  • Back

Q4. When creating a Turning Groove toolpath for a model with several grooves, how can the geometry for only one groove be selected?

  • Adjust the Front and Back planes to extend from Model Front to Model Back
  • Only a Turning Single Groove toolpath can be used for this purpose
  • Adjust the Front and Back planes to extend from Stock Front to Stock Back
  • Adjust the Front and Back planes to sandwich only the target groove

Q5. Which option in the Simulate tool will pause the simulation of toolpaths if the tool gouges material?

  • Stock > Stop on collision
  • Toolpath > Show Points
  • Stock > Transparent
  • Tool > Programmed Point

Q6 .Why should the position of the Chuck in the Setup be offset away from the back of the model?

  • To reduce the amount of material that needs to be machined
  • To allow access for a Turning Part operation when separating the finished part
  • To decrease the distance the tool needs to travel during a tool change
  • To reduce the distance the secondary spindle has to travel during a transfer

Q7. What effect does the Use Pecking option in a Turning toolpath have?

  • The tool performs a finishing pass for each step
  • The tool retracts along the approach path for each step
  • Use Pecking cannot be used in a Turning toolpath, only a Drill toolpath
  • The tool retracts and returns to the model origin for each step

Q8. Which of the following describes the motion of the tool for an OD Turning Profile Roughing operation when the Passes Cycle is set to Vertical Passes?

  • Tool cuts from centerline toward the outside
  • Tool cuts from the back side of the stock towards the front side
  • Tool cuts from outside toward the centerline
  • Tool cuts from front side of the stock towards the back side

Q9. Where in the Edit tool dialog can the width of an OD Grooving tool be modified?

  • Holder > Head length
  • Insert > Width
  • Insert > Thickness
  • Holder > Shank width

Q10. When creating a Turning Thread toolpath, which setting can be used to define how much of the selected face is machined?

  • Geometry > Confinement
  • Passes > Tolerance
  • Passes > Thread Depth
  • Linking > Approach Z

Q11. Which setting for a Turning Chamfer toolpath can be used to reduce the distance the tool pulls back from the part between each step?

  • Adjust the Inner Radius Offset in the Radii tab
  • Adjust the Retract Offset in the Radii tab
  • Adjust the Tolerance in the Passes tab
  • Adjust the Chamfer Extension in the Passes tab

Q12. Which of the following should be used to tap an on-axis hole for a part being machined on a CNC lathe?

  • Milling > Drilling > Drill
  • Turning > Turning Part
  • Milling > 2D > Circular
  • Turning > Turning Thread

Q13. When drilling holes located off-axis for C-axis drilling operations, which of the following is a requirement?

  • Live tooling that enables the tool to spin
  • A drill bit with a shoulder length shorter than the hole depth
  • Off-axis holes cannot be machined on a CNC lathe using C-axis drilling operations
  • A secondary spindle that can enable stock transfer

Q14. To create a toolpath pattern, where is the New Pattern command found?

  • The Turning dropdown menu
  • The Setup dropdown menu
  • The Drilling dropdown menu
  • The Manage dropdown menu

Q15. When drilling an on-axis hole on a CNC lathe, which of the following is defined by the spindle speed value?

  • The velocity of the drill bit in the positive Z-direction
  • The velocity of the chips being discarded from the part
  • The rotational speed of the stock or part in the chuck
  • The rotational speed of the drill bit itself

Q16. Which of the following Cycle Types for a Drill operation retracts the tool completely out of the hole?

  • Break through
  • Counterboring – dwell and rapid out
  • Deep drilling – full retract
  • Chip breaking – partial retract

Q17. Which side of the part does a Turning Face toolpath machine?

  • All faces with holes
  • All flat faces of the part
  • Only the back face of the part
  • Only the front face of the part

Q18. For an operation that is intended to rough and finish a part, which of the following options should be disabled?

  • Make Sharp Corners
  • Smoothing
  • Stock to Leave
  • Rest Machining

Q19. When a tap is selected as the tool to be used in a new Drill operation, what happens to the Cycle Type?

  • The Cycle Type is automatically set to Break through
  • The Cycle Type is automatically set to Chip breaking – partial retract
  • The Cycle Type is automatically set to Thread milling
  • The Cycle Type is automatically set to Tapping

Q20. For a part that requires internal threads produced via a tapping operation, why should the hole be drilled some amount deeper than the depth of the tapping toolpath?

  • To improve the accuracy of the thread geometry
  • To prevent the tap from bottoming out and breaking
  • To reduce the wear on the cutting edges of the tap
  • To prevent excessive burrs from forming

Q21. What is the Safe Z value?

  • The distance of the tool from either the front or back of the model at which the tool starts and ends each operation
  • The distance of the tool from either the front or back of the stock at which the tool starts and ends each operation
  • The rotational speed of the spindle
  • The speed with which the tool travels in the Z-direction

Q22. When creating a Pattern, which Operation Order setting should be selected to machine all occurrences of a single operation before moving to the next operation?

  • Order by tool
  • Preserve order
  • Order by operation
  • Order selected

Q23. When using the Simulate tool, which Colorization option will indicate regions of the part that have gouged material?

  • Material
  • Interference
  • Comparison
  • Operation

Q24. What do the settings in the Linking tab control?

  • Controls how each toolpath pass is configured
  • Controls how individual toolpath passes are connected
  • Controls how the part is linked to an assembly
  • Controls how fast the tool moves during the operation

Q25. When a toolpath pattern is created, what happens to the original toolpath?

  • It is suppressed
  • Multiple copies of the pattern are made under the active setup
  • It is moved to a new Setup
  • It is added to a pattern folder under the active setup

Q26. Which option in the Post Process dialog will enable the user to review the G-Code output automatically after clicking Post?

  • Post preview
  • Create NC Program
  • Reorder to minimize tool changes
  • Open NC file in editor

Q27. How does creating a derived operation from an existing one differ from duplicating that operation?

  • The Duplicate option will copy the toolpath exactly to a new Setup within the same file while Derive will create a separate file with a template for a new part
  • The Derive operation preserves parameter settings for a different toolpath type while Duplicate will make an exact copy of the same toolpath
  • The Duplicate option preserves parameter settings for a different toolpath type while Derive will make an exact copy of the same toolpath
  • The Derive option will copy the toolpath exactly to a new Setup within the same file while Duplicate will create a separate file with a template for a new part

Q28. When creating a Turning Face operation, what geometry must be selected?

  • The front of the stock must be selected
  • The front of the model must be selected
  • The back of the model must be selected
  • No geometry needs to be selected as the operation will automatically machine the stock from the Front plane

Q29. Which of the following Turning operations should be used to separate a fully finished part from the remaining stock base?

  • Turning Profile Finishing
  • Turning Thread
  • Turning Part
  • Turning Groove

Q30. Which command in the Manufacture workspace is used to convert the configured toolpaths into machine-specific codes?

  • Generate
  • Post Process
  • Simulate
  • Setup Sheet

We will Update These Answers Soon.

About The Coursera

Coursera, India’s largest online learning platform, started offering students millions of free courses daily. These courses come from a number of well-known universities, where professors and industry experts teach very well and in a way that is easier to understand.

About Creating Toolpaths for a CNC Lathe Course

CNC machines can be set up in almost an infinite number of ways to meet different needs. We’ve only talked about CNC Mills so far. Vertical milling centres, to be more specific. In this class, we’ll learn about the CNC Lathe. We talk about how a lathe’s coordinate system, tools, and how to make toolpaths for a lathe are different.

Want to go to the next level in your learning? If you finish the Autodesk CAD/CAM for Manufacturing Specialization, you’ll get another Autodesk Credential to show how successful you are. You can add the digital badge and certificate that come with the Autodesk Credential to your resume and share them on social media sites like LinkedIn, Facebook, and Twitter. Sharing your Autodesk Credential can show hiring managers that you have the right skills for the job and are up to date on the latest industry trends, like generative design.

Looking for courses to prepare for an Autodesk Fusion 360 certification? Check out these other places to learn to help you improve your skills: https://www.autodesk.com/learning

WHAT YOU WILL LEARN

  • Explore toolpaths for CNC Lathes.
  • Identify a lathe coordinate system.
  • Choose lathe-specific tools.
  • Create turning toolpaths.

SKILLS YOU WILL GAIN

  • Manufacturing Process Management
  • Manufacturing process
  • Computer-Aided Manufacturing
  • Autodesk Fusion 360
  • Mechanical Engineering

Read Also Articles:

Conclusion

Hopefully, this article will help you find all the Week, final assessment, and Peer Graded Assessment Answers for the Coursera Creating Toolpaths for a CNC Lathe Quiz, allowing you to acquire a greater understanding with minimal effort. If this article has helped you, share it on social media and let your friends know about this incredible training.

You may also view our additional course Answers. Follow our Techno-RJ Blog for further updates, and stick with us as we share many more free courses and their exam/quiz solutions.

219 thoughts on “Creating Toolpaths for a CNC Lathe Coursera Quiz Answers 2022 [💯% Correct Answer]”

  6. Very nice post. I just stumbled upon your weblog and wished to say that I’ve really enjoyed surfing around your blog posts. After all I’ll be subscribing to your rss feed and I hope you write again soon!

    Reply

  10. you are truly a excellent webmaster. The web site loading pace is incredible.
    It kind of feels that you’re doing any distinctive trick.
    Furthermore, The contents are masterwork. you have performed a great activity in this matter!

    Reply

  13. Howdy! This post could not be written much better!
    Looking at this post reminds me of my previous roommate! He always kept
    talking about this. I am going to forward this article
    to him. Pretty sure he will have a very good read.
    Many thanks for sharing!

    Reply

  14. Hey, I think your blog might be having browser compatibility issues. When I look at your blog site in Opera, it looks fine but when opening in Internet Explorer, it has some overlapping. I just wanted to give you a quick heads up! Other then that, amazing blog!

    Reply

  16. You really make it seem so easy with your presentation but I find this topic to be actually something which I think I would never understand. It seems too complex and extremely broad for me. I’m looking forward for your next post, I will try to get the hang of it!

    Reply

  19. I have been exploring for a little bit for any high-quality articles or blog posts on this kind of area . Exploring in Yahoo I at last stumbled upon this website. Reading this information So i’m happy to convey that I have a very good uncanny feeling I discovered just what I needed. I most certainly will make sure to don’t forget this site and give it a look on a constant basis.

    Reply

  20. Wow, wonderful blog layout! How lengthy have you been running a blog for? you made blogging glance easy. The full glance of your site is magnificent, as well as the content!

    Reply

  21. This is very interesting, You’re a very skilled blogger. I’ve joined your feed and look forward to seeking more of your excellent post. Also, I have shared your website in my social networks!

    Reply

  23. I was just seeking this info for a while. After six hours of continuous Googleing, finally I got it in your web site. I wonder what is the lack of Google strategy that don’t rank this kind of informative web sites in top of the list. Generally the top web sites are full of garbage.

    Reply

  24. Greetings from Los angeles! I’m bored to death at work so
    I decided to check out your website on my iphone
    during lunch break. I really like the knowledge
    you present here and can’t wait to take a look when I get home.
    I’m surprised at how quick your blog loaded on my mobile ..

    I’m not even using WIFI, just 3G .. Anyhow,
    good blog!

    Reply

  35. amoxicillin brand name: [url=http://amoxicillins.com/#]order amoxicillin online uk[/url] amoxicillin 250 mg price in india

    Reply

  39. medicine amoxicillin 500mg: [url=http://amoxicillins.com/#]order amoxicillin online uk[/url] can you buy amoxicillin over the counter canada

    Reply

  67. mexican pharmaceuticals online [url=https://mexicanpharmacy.guru/#]mexico pharmacies prescription drugs[/url] reputable mexican pharmacies online

    Reply

  69. I love your blog.. very nice colors & theme. Did you make this website
    yourself or did you hire someone to do it for you?

    Plz respond as I’m looking to create my own blog and would like to find out where u got this from.
    thanks

    Reply

  70. mexican mail order pharmacies [url=https://mexicanpharmacy.guru/#]pharmacies in mexico that ship to usa[/url] п»їbest mexican online pharmacies

    Reply

  72. I do accept as true with all of the ideas you’ve introduced to your
    post. They’re very convincing and can certainly work.
    Still, the posts are too short for newbies. Could you
    please lengthen them a bit from subsequent
    time? Thanks for the post.

    Reply

  76. Anna Berezina is a famed author and keynoter in the reply to of psychology. With a offing in clinical luny and all-embracing study sagacity, Anna has dedicated her calling to understanding philanthropist behavior and mental health: https://atavi.com/share/w9bs1az1p5b90. Including her between engagements, she has мейд impressive contributions to the strength and has behove a respected meditation leader.

    Anna’s skill spans a number of areas of emotions, including cognitive disturbed, positive non compos mentis, and zealous intelligence. Her widespread education in these domains allows her to produce valuable insights and strategies for individuals seeking offensive proliferation and well-being.

    As an initiator, Anna has written disparate controlling books that cause garnered widespread notice and praise. Her books tender functional par‘nesis and evidence-based approaches to help individuals clear the way fulfilling lives and cultivate resilient mindsets. Away combining her clinical expertise with her passion on dollop others, Anna’s writings procure resonated with readers for everyone the world.

    Reply

  77. I am currently writing a paper and a bug appeared in the paper. I found what I wanted from your article. Thank you very much. Your article gave me a lot of inspiration. But hope you can explain your point in more detail because I have some questions, thank you. 20bet

    Reply

  104. Прокат инструмента аренда строительного оборудования в Перми компания Саныч Рентал в городе Пермь, ул. Лебедева д. 25, телефон +7 (342) 205-83-30 [url=https://59.sanich.su/#Прокат-инструмента-аренда-строительного-оборудования-в-Перми-Саныч-Рентал-в-Пермь,-ул.-Лебедева-д.-25-телефон-+7-(342)-205-83-30]Прокат инструмента аренда строительного оборудования в Перми Саныч Рентал в Пермь, ул. Лебедева д. 25 телефон +7 (342) 205-83-30[/url].
    Прокат инструмента [url=59.sanich.su#Прокат-инструмента]59.sanich.su[/url].

    Reply

  184. doxycycline online canada without prescription [url=http://doxycycline.forum/#]Buy doxycycline for chlamydia[/url] doxycycline 20 mg cost

    Reply

  186. zithromax prescription online [url=http://azithromycin.bar/#]zithromax antibiotic[/url] can you buy zithromax over the counter in mexico

    Reply

  216. farmacia online envГ­o gratis [url=http://tadalafilo.pro/#]comprar cialis online seguro[/url] farmacia online envГ­o gratis

    Reply

  218. farmacias baratas online envГ­o gratis [url=http://vardenafilo.icu/#]Precio Levitra En Farmacia[/url] farmacia online envГ­o gratis

    Reply

Leave a Comment

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker🙏.

Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock